Products
Metal Form Industry
Die Casting Industry
Need more info?

Pro-Mix III DC Lubricating System

Pro Mix V Lubricating SystemSPECIFICATIONS

The PRO-MIX lubricating system is manufactured to thoroughly mix lubricant concentrate with water to the desired mixture, and distribute the mixture to each press through an in-plant piping network. Each press coupled to the network will receive a continuous, supply of pressurized lubricant. Additionally, the lubricating system can be manufactured to supply TWO or THREE different mixtures of the lubricant concentrate to each press. The following proposal defines the FUNCTION, SYSTEM COMPONENTS, SAFETY FEATURES, and COST of the machinery.

SYSTEM COMPONENTS
  1. Dual Stainless Steel Liquid Reservoirs (Water and Lube Concentrate) used to stabilize the liquids prior to mixing. Support systems of the reservoirs include: Automatic Liquid Refill Systems (Pump/Valve Assembly).
  2. Fluid Level Supervisory System. Fluid level monitors located within the system reservoirs continuously monitor the level of the two materials. These monitors are used to refill the reservoirs on demand and to discontinue the machine's service if a dangerous low material level develops during the systems operation.
  3. Patented PRO-DRIVE Assembly used to thoroughly mix, control, and pressurize if necessary the mixture. Components include: Vari-Drive Transmission, Drive Motor, Pump Network, and Mixture Transducer.
  4. Mixture Ratio Display that displays the mixture being produced by the machine. The display will additionally total the volume used during a user selectable period.
  5. Mixed Material Distribution System used distributes the mixed material. The distribution system pressurizes the mixed material for automated distribution to the production machinery through an in-plant-piping network.
  6. LOCKABLE Ratio Adjustment Control. This control device includes a KEY lockable switch that allows ONLY the personnel with the key access to the mixture adjustment.
  7. Electrical and Electronic Package used for system control and process monitoring - Components include: Support Electrical Apparatus, System PLC, Mixture Display, and Operators Interface.
  8. System ALARM and Diagnostic Indicators. The system includes an Audible/Visual Alarm that activates if a system problem develops, and process diagnostic indicators that identify the problem area.

MIXTURE RATIO DISPLAY
The MIXTURE RATIO is displayed in whole numbers that represents the mixture being produced as the machine cycles. EXAMPLE: A mixture of 50/1 would be displayed as 50. Any change in the mixture ratio would reflect a change in the display. As the mixing cycle has completed the display will LOCK IN the mixture value. The display is coupled to a flow transducer that accurately measures the flow of the WATER in the mixture. Because the PRO-MIX III varies only the amount of water in the mixture and mixture changes are made by INCREASING or DECREASING the amount of water only, the displayed value can be held within +/1%. Additionally, the display will total the amount of mixture produced over a period of time in gallons. This value is selective and can be reset as required. Because the MIXTURE DISPLAY is Manufactured to comply with a variety of applications by Red Lion Controls, additional benefits may be realized. As a standard option the display includes a RS-485 Communication loop which can interface with a standard computer system. Pertinent information such as RATIO/VOLUME/TIME/ DATES can be transmitted to the computer each cycle of the machine and archived for future reference.

SAFETY FEATURES SUPPORTED BY ACCURATE METERING SYSTEMS
  1. Low Liquid Level Sensors that will discontinue the machine's service if a DANGEROUS Low Level is detected in the system's Water or Lube Concentrate reservoir.
  2. High Pressure Supervision that will discontinue the machine's service if a DANGEROUS high-pressure is detected.
  3. Mechanical Pressure Relief to insure protection if the high-pressure safety switch fails.
  4. In Plant Piping Supervision that will discontinue the machines service if a delivery line fails.
  5. Lubricant Concentrate Supply Supervision that will alert the system's operator to a supply out condition. This safety alarm will NOT discontinue the machine's service.
  6. Audible/Visual Alarm System consisting of a RED flashing strobe light and horn that activates if a process problem develops.
  7. Diagnostic Indicators used to identify a process problem if one occurs including SUPPLY EMPTY.
  8. KEY Controlled Ratio Adjustment System allowing only the individuals with the KEY system access. This feature is included on both pressure and non pressure systems.

UNIQUE CHARACTERISTICS
  1. MIXTURE TESTING FEATURE. The Mixture Testing function is used to mechanically test the mixture being produced by the machine. The test takes only minutes to perform and does not require the machine to be taken OFF-LINE.
  2. All of the machine functions are controlled and monitored by system's Allen Bradley MicroLine 1000 PLC.
  3. ONLY the AMOUNT of WATER can be varied in the mixture. Greater process control is attained through the utmost in mixture stability.
  4. Mechanical coupling of the TWO system pumps for absolute MIXTURE CONTROL.
  5. ONE 3/PHASE 1.5 HP INDUSTRIAL MOTOR controls all of the machine's mixing functions.
  6. Through a simple modification the PRO-MIX III can be adapted to a variety of mixture ranges.
  7. Diagnostic Displays - Alarm System.

SPECIFICATIONS AND DATA
Electrical = 208/240/480 VAC Three Phase Operational Voltage.
115 VAC Control Voltage.
Total HorsePower = 2 HP.

Electronic = Machine Control = Allen Bradley Micro.
Mixture Display = Red Lion Control.

Mechanical = Lube Concentrate Holding Capacity = 20 Gallons.
Water Holding Capacity = 20 Gallons.
Mixture Output = 150 Gallons per Hour.
Ratio Range = Customer Dependent.
Pressure Range to 80 PSI.

Dimensions = Machine Height = 50 Inches.
Machine Width = 48 Inches.
Machine Depth = 48 Inches.

MIXTURE RATIO RANGES DEFINED AS WATER 10 TO LUBE 1 = (10/1)
1/1 to 4/1 The preferred method of choosing a
3/1 to 10/1 mixture ratio range is by determining
6/1 to 20/1 the mixture you require and choose
10/1 to 30/1 the range that will produce
20/1 to 60/1 the mixture at 50% of the scale.
30/1 to 90/1 EXAMPLE: Require Ration = 40 to 1
50/1 to 150/1 Required Range = 20/1 to 60/1

Supplied with each system will be an easily interpreted user manual that includes:
  1. Installation
  2. Operation
  3. Safeties Defined
  4. Trouble Shooters Guide
  5. Electrical Diagram
  6. Parts List
  7. Machine Layout

All work will be performed in a workman like manner using Top Quality lubricating systems components and construction methods. The lubricating system has a ONE Year Parts Warranty, and is shipped complete, tested, and preset to meet your operational criteria.

OPTION: As an option a DUAL or REDUNDANT system may be required. The DUAL system includes TWO independent proportional/mixing devices consisting of the drive transmission, drive motor, pump assembly, mixture display, electricals, and the necessary plumbing. A selector switch is provided to select mixing station A or B. Common to both mixing stations are the reservoirs, reservoir refill devices, system electronics, and the system's manifold assembly. Selection of the desired drive is accomplished by setting a two position selector switch to the appropriate position (SYSTEM A or B)

REQUEST FOR QUOTES

site map  |  Site Credits: Ecreativeworks