Custom Manifolds

2-Injector Manifold

4-Injector Manifold

8-Injector Manifold
Injector Manifold Assembly which includes the Manifold, Pressure Regulator, Injectors, and Injector Coils. Pressurized lubricant is encapsulated within the manifold assembly until the injection cycle is initiated.
A means to generate the necessary lubricant pressure required to pressurize the manifold assembly.
For our customers who require ONLY the Injector Manifold Assembly for use with their existing processor SPRA-RITE manufactures a Manifold Package including the Injector Manifold - Enclosure Interface Pressure Regulator - Pressure Gauge.
ONE INJECTOR SERIES (P/N = SR-MA-1)
TWO INJECTOR SERIES (P/N = SR-MA-2)
FOUR INJECTOR SERIES (P/N = SR-MA-4)
EIGHT INJECTOR SERIES (P/N = SR-MA-8)
(Each manifold must have a means of Lubricant Pressure Generation.)
LUBRICANT PRESSURE GENERATORS
- Air operated diaphragm pump assembly including 6GPM Pump - Mounting Bracket.
- The mounting bracket includes a steel lid that fits on top of a 5 gallon pail, lift the assembly and place the assembly on top of a fresh supply of lube
- Low Lubricant Level Float Switch
- Portable air pressurized lubricant reservoir including Stainless Steel Reservoir - Fill/Dump Valve
- Low Lubricant Level Safety Float Switch.
- 7 GALLON CAPACITY
- 12 GALLON CAPACITY
- 16 GALLON CAPACITY
- OPTIONAL STEEL PEDESTAL FRAME with RESERVOIR ATTACHED and 1 Gallon Reserve Tank/Piping/Necessary Valving
- Custom designed systems to meet individual requirements of the user. Cost dependent upon design.
(See Proportional Mixing Systems for closed loop turn-key pressure generators.)

