Products
Metal Form Industry
Die Casting Industry
Need more info?

Pro-Mix II Lubricating System

Pro-Mix II Lubricating System SPECIFICATIONS
The PRO-MIX lubricating system is manufactured to thoroughly mix lubricant concentrate with water to the desired mixture, and distribute the mixture to each press through an in-plant piping network. Each press coupled to the network will receive a continuous supply of pressurized lubricant. Additionally, the machinery can be manufactured to supply TWO or THREE different mixtures of the lubricant concentrate to each press. The following proposal defines the FUNCTION, SYSTEM COMPONENTS, SAFETY FEATURES, and COST of the machinery.

PRO-MIX II LUBRICATING SYSTEM COMPONENTS
  1. Patented PRO-DRIVE Assembly used to precisely and thoroughly mix the two materials - Components include-Constant output chemical concentrate pump - Variable out put water mixing pump - Vari-Drive speed transmission - Electric motor - Necessary pluming and piping.
  2. Dual Stainless Steel Reservoirs used to stabilize the lubricant concentrate and water prior to mixing. The reservoirs refill automatically by means of gravity utilizing mechanical ball float switches.
  3. Ratio Adjustment Control Dial. A ratio adjustment dial located in the Vari-Drive controls the speed of the water-mixing pump. By adjusting the control dial ANY mix mixture ratio can be produced within the mixing limits of the system.
  4. Ratio Control Display that displays the calculated mixture ratio as the unit cycles. The display reads in ratio units and includes the LCD display and transducer.
  5. Electrical package which include a THREE PHASE industrial duty motor, disconnect fusing and over load protection.

UNIQUE CHARACTERISTICS
  1. MIXTURE TESTING FEATURE. The ratio testing function is used to mechanically test the mixture being produced by the machine. The test takes only minutes to perform and does not require the machine to be taken OFF-LINE.
  2. ONLY the AMOUNT of WATER can be varied in the mixture. Greater process control is attained through the best possible mixture stability.
  3. Mechanical coupling of the TWO system pumps for absolute MIXTURE STABILITY and MIXTURE CONTROL.
  4. ONE THREE PHASE 1.5 HP MOTOR controls all of the machine's mixing functions.

Pro-Mix II Lubricating System The PRO-MIX II lubricating systems extract the lubricant concentrate from a 55 gallon drum, multi-drum tote by means of gravity, or can be manufactured to, upon demand, refill from centrally located pressurized source. Each lubricating system includes a water reservoir that automatically refills upon demand. The water reservoir stabilizes the water pressure prior to the mixing sequence and is used as a vacuum break between the water supply and PRO-MIX unit. Additionally, each system assembled on a floor mounted steel platform.

The PRO-MIX II lubricating system includes ALL of the standard features of our larger systems on a smaller scale. The PRO-MIX II is manufactured to thoroughly mix within the mixture range of unit and pressurize the mixture for automated delivery of the mix to the production machinery. The PRO-MIX II lubricating system will automatically cycle ON as required pressurizing the mixture with in the mixture reservoir. The reservoir is coupled to all of the production machinery requiring lubricant.
  1. THREE PHASE electrical package including: Disconnect, Fusing, Motor Starter, Motor Protection and Transformer.
  2. Audible/Visual ALARM system that activates upon fault detection.
  3. MIXTURE RATIO Display that displays the calculated mix mixture ratio value the machine is producing, as the machine cycles.

MIXTURE RATIO RANGES DEFINED AS WATER 10 TO LUBE 1 = (10/1)
(A) 1/1 to 4/1 The preferred method of choosing a
(B) 3/1 to 10/1 mixture ration range is by determining
(C) 6/1 to 20/1 the mixture you require and choosing
(D) 10/1 to 30/1 the range that will produce
(E) 20/1 to 60/1 the mixture at 50/5 of the scale.
(F) 30/1 to 90/1 EXAMPLE: Require Ration = 40 to 1.
(G) 50/1 to 150/1 Required Range = 20/1 to 60/1.
All work will be performed in a workman like manner using Top Quality component parts and construction methods.

The lubricating system has a ONE Year Parts Warranty, and is shipped complete tested, and preset to meet your operational criteria.

REQUEST FOR QUOTES

site map  |  Site Credits: Ecreativeworks