Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

Pro-Mix™ V Lubricant Mixing System


The Pro-Mix V proportional lubricant and coolant mixing system is used to thoroughly mix with water, ONE die lubricant, to the mixture ratio selected by the user, and to monitor and control the critical process variables. This includes refilling the reservoirs on demand, and to discontinue the machine's service if a dangerous low material level develops during the system's operation. The pump is capable of supporting plant-wide distribution, running multiple lubes and ratios* and comes standard with our CPM-5 controls package and 30-gallon accumulator with typical output from 150 to 250 gph.

*multiple dilution ratios can be achieved by simple electronic reprogramming

Pro-Mix V Proportional Lubricat Mixing System Features

  • Variable speed drive assembly used to thoroughly mix, control, and pressurize
  • Digital display of dilution ratio 
  • Accurate ratios with 1%
  • Air-mixing motor with propeller
  • Ultrasonic Level sensor for auto-refilling with automatic water shut off
  • System alarm and diagnostic indicators
  • CPM-5 Controls Package
  • 120 volt power system
  • 30 gallon storage accumulator
  • 20 gallon separate stainless steel holding tanks for lubricant and water
  • Standard tote rack included
  • Distribution can be automated through an in-plant piping network

Other Lubrication Products

Ask A Question

Fill out the form below to request more information on Industrial Innovations Metalworking Spray Lubrication Management and Die Casting and Foundry Automation.


View All