Reclaim Pro-22 Fluid Purification System

The MSR-22 Reclaim-Pro™ lubrication & coolant purification system is a plant-wide sustainability solution for fluid recycling combining a large-scale treatment tank with HMI controlled processing system and powerful outbound delivery pump. A tramp-oil pump, sold separately, sends contaminated fluid into the separator tank for natural division where tramp oils float through the coalescing plates for removal by pump to waste tote for discarding. The control system will pull cleaned fluid from the MSR-22 purification system holding tank and store it in a 30-gallon pressurized accumulator tank until called for. The pumping network will automatically refill when the pressure drops below the desired pressure setting. Pressure is monitored utilizing digital pressure switches. As an option, our Pro Mix™ Proportional Mixing Systems can be hooked into the MSR reclaim unit to add fresh mixed coolant to maintain safe operating levels. Also available are Biocide Dosing systems to help keep bacteria at a safe level.

• Reduce lubrication requirements up to 70%
• Lower waste hauling costs
• 10+ years of field life and easy maintenance
• Cleanable 576 ft2 coalescing plate system - No absorbents required
• Gravity fed for self-operation
• Tramp-oil pump sold separately
• 10-gallon separation tank
• 11 gpm gear pump for output to application system
• Typical output capacity 4 gallons per minute
• Ultrasonic liquid sensor for auto-refilling and water shut-off
• 30-gallon stainless-steel pressurized accumulator tank
• Fixed base for solid installation with fork lift pockets
• PLC driven-HMI controlled for ultimate command
  • 480V 20 amp power disconnect, fusing transformer
  • 24VDC Power supply, motor starter for tramp oil removal
  • Low level and, tramp oil overflow alarms
• 110V Power Required
• Optional magnetic screen for metal shaving collection