Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

Reclaim Pro-5 Fluid Purification Systems

IMPROVE YOUR SUSTAINABILITY AND LOWER LUBRICATION COSTS AND WASTE HAULING

Our MSR-5 Reclaim-Pro™ lubrication & coolant purification system is an effective, reliable, and fluid purification solution for single presses or smaller pressrooms with a typical output of ½ gallon per minute of cleaned lubricant. Contaminated fluids are driven into the separating tank by way of our pre-installed tramp-oil pump. Fluids are left to separate naturally so that the heavy oils float through the coalescing plates and trapped for removal. After purification, cleansed fluids are gravity-fed down into the holding tank and later transferred to your Spra-Rite™ application system via the ‘mini-Pro’ diaphragm pump. More contaminated fluids are pumped into the system based on a pre-set timing control that allows adequate separation time between batches.

Reclaim-Pro 5 Purification System Features

  • Reduce lubrication requirements up to 70%
  • Lower waste hauling costs
  • 10+ years of field life and easy maintenance
  • Cleanable coalescing plate system - No absorbents required
  • Gravity fed for self operation
  • Tramp-oil pump included with adjustable input timer
  • 5-gallon separation tank
  • 6 gpm diaphragm pump for output to application sprayer
  • Output capacity of 1/2 gallon per minute
  • 20 gallon stainless-steel holding tank
  • Portable pedestal style for easy portability
  • 110 volt power required
  • Optional magnetic screen for metal shaving collection
  • Low level alarm cable can attach to outside alternative source

Other Lubrication Products

Ask A Question

Fill out the form below to request more information on Industrial Innovations Metalworking Spray Lubrication Management and Die Casting and Foundry Automation.

Resources

View All